This kit comes with everything needed to build a robot that can be controlled by a human operator or programmed to run autonomously.--Ministry of Education website.

Robotics and Automation 10, 20, 30 (2019). 276-2700. Contents: MOTION: (3) 2-Wire Motor 393 -- (21) Shaft Collar -- (4) Shaft Coupler -- (8) Shaft, 3" Long -- (18) Bearing Flat -- (2) Spur Gear, 12-tooth -- (6) Spur Gear, 60-tooth -- (2) Spur Gear, 84-tooth -- (4) 4" Wheel -- (1) Claw Kit Assembly (includes motor). STRUCTURE: (2) Bar, 20-hole -- (2) Chassis Bumper (20-hole) -- (4) Chassis Rail (16-hole) -- (2) C-Channel, 1x2x1x15 hole -- (1) C-Channel, 1x2x1x20 hole. ELECTRICAL: (1) 7.2V Robot Battery NiMH 3000mAh -- (1) Smart Charger & Power Cord -- (1) AAA NiMH Rechargeable Battery (6-pack) -- (1) 8-Bay AA/AAA Smart Battery Charger -- (2) Motor Controller 29 -- (1) Battery Strap (2-pack). ELECTRONICS: (1) VEX ARM® Cortex®-based Microcontroller -- (1) USB A-A Tether Cable. CONTROL: (1) VEXnet Joystick -- (2) VEXnet Key 2.0 -- (1) VEXnet Backup Battery Holder. HARDWARE: (32) Screw, 8-32 x 1/4" Long -- (14) Screw, 8-32 x 1/2" Long -- (3) Screw, 8-32 x 1 1/2" Long -- (6) Locking Screw, 6-32 x 1/4" Long -- (6) Locking Screw, 6-32 x 1/2" Long -- (42) Nut, 8-32 Keps -- (6) Shaft Spacer, Thin (4.6mm) -- (50) 4" Zip Ties -- (32) Bearing Attachment Rivet. EQUIPMENT: (2) Tool, Hex Key (5/64") -- (2) Tool, Hex Key (3/32") -- (2) Tool, VEX Open-Ended Wrench -- (1) Quick Start Guide, Clawbot. www.vexrobotics.com/276-2700.html#Docs_&_Downloads. .